|
|
 |  | • SPHERICAL Radius on Head allows installation without extra machining on the head | | • Precision ground shanks provide the press fit necessary for secure installation | | • Smooth surface with non-galling surface treatment eliminates wear | | • Made from High Tinsel Strength Steel and Treated for Lubricity |
| 
| | | | |
AP037-L
| *0.3765
| 10*
| 0.256
| 0.562
| AP037-L
| *0.3765
| 15*
| 0.264
| 0.562
| AP037-L
| *0.3765
| 20*
| 0.275
| 0.562
| AP050-L
| *0.5015
| 10*
| 0.258
| 0.688
| AP050-L
| *0.5015
| 15*
| 0.268
| 0.688
| AP050-L
| *0.5015
| 20*
| 0.283
| 0.688
| AP063-L
| *0.6265
| 10*
| 0.260
| 0.812
| AP063-L
| *0.6265
| 15*
| 0.273
| 0.812
| AP063-L
| *0.6265
| 20*
| 0.291
| 0.812
| AP075-L
| *0.7515
| 10*
| 0.324
| 0.938
| AP075-L
| *0.7515
| 15*
| 0.339
| 0.938
| AP075-L
| *0.7515
| 20*
| 0.361
| 0.938
|
|  | Notes:
*Diameter dimension specified for hole
will provide approximately .000 to .001
clearance with the P diameter or press fit
area of the pins. Moldmaker to adjust D
diameter hole dimensions to obtain
specific fit required.
Cut angle pin to length as required to
achieve desired travel on slide. Typically,
a spherical radius or cone shape with a
spherical radius is machined on end of
angle pin (opposite the head).
Spherical radius on head is suitable for
angles up to and including 20°. |
|
Prev | | 
Next |
|
|
|
